We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello, We are trying to integrate CoreSight SOC600 VIP in our SOC project and had the following queries : 1.> In older CoreSight 400 BST based flow we use to get the following document : DAP Macro Language. So can we get the equivalent reference manual for the new C based CoreSight SOC600 based flow. Currently we are referring the following three files : SOC600 validation flow overview, soc600 config and integ manual,soc600 TRM. 2.> Can you help in sharing one example of configuring multi TAP and ways to select/bypass multiple TAPS controllers connected in daisy chain. a. While running in JTAG mode(5 pins) , In older BST based flow we had the following VIP macros(CONFIG_SELECT_TAP section 5.2.4.11 in BSTUserGuide , refer attached snippet) that we used for configuring and selecting of multiple TAPS connected in daisy in our SOC design. (we are trying to look for the equivalent C functions in the new VIP )
Hi there, thank you for asking a question. Please may you let me know where is best to move your question to? We have a list of Support Forums here: https://community.arm.com/support-forums/ many thanks.
Hi there, I have moved your question to the Embedded forum. Please let me know if this is ok. Many thanks.