We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Sir,
I am working on Cortex-M4 over serial wire debug protocol, i am able to read IDCODE(0x2ba01477) which is correct as per arm cortex m4 technical reference manual, and i am writing 0x50000000 to CTRLSTAT register to enable CSYSPWRUPREQ and CDBGPWRREQ which is also success without any ACK error,but the thing is when i am trying to read the CTRLSTAT register i got 0xffffffff . I don't understand what might be the problem,Please suggest me what would be the problem??
Thanks & Regards
Please try ARMv7-M Architecture Reference Manual. You need to register on ARM web site to download this document.
(ARMv7-M Architecture Reference Manual)
Section C 1.8 for DWT (watchpoint), C 1.11 for FPB (breakpoint) and C 1.6 for debug registers in the processor for halting control.
regards,
Joseph