We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi Folks,
We need a clarification on Read Data Interleaving on AXI4
Read Data Interleaving is supported in AXI4 and following is my understanding on Data Interleaving:
Multiple Read commands can be executed simultaneously and data interleaving is supported as long as all condition for ordering are followed.
I think data interleaving should not be done within a single burst. In other words, any single burst should contain data from single read command and no burst should contain data from multiple command.
I tried to confirm it but could not find a reference for it.
Can anyone confirm it or point me to a reference document for confirmation.
Thanks,
Amit
Hello Amit,
<<ARM IHI 0022E>> is available at:
ARM Information Center
--> AMBA
--> AMBA specifications
--> AMBA AXI and ACE specification
--> Issue E
You may need to register as an ARM user before downloading.