We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello community ! I hope you guys are doing fine, this is my first post here with the arm community.
I have a problem regarding my MCU Arm Cortex M4F S32K144, after performing several resets each 3/4 seconds (needed for my test), I see that, randomly, the arm enters a LOCK UP state after the 60th, 77th, 144th... reset attempt, at a random occurrence each time I run the test (the test basically performs a hardware reset to the arm).
I could detect that my MCU enters a Lock by reading the SSRS register, it states that the arm has entered the LOCK UP state.
Do you guys have any idea which registers I can read in order to tighten the researches regarding the causes that led the MCU to go to the LOCK UP state.
Best regards !