This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Xen/dom0 on Juno

Hey all,

I have been playing around with Xen and Dom0 on a Juno r0 board. Currently dom0 is failing to initailize USB. This is an issue because the rootfs depends on the usb.

usb 1-1: new high-speed USB device number 2 using ehci-platform

usb 1-1: device descriptor read/64, error -32

usb 1-1: device descriptor read/64, error -32

usb 1-1: new high-speed USB device number 3 using ehci-platform

atkbd serio0: keyboard reset failed on 1c060000.kmi

usb 1-1: device descriptor read/64, error -32

usb 1-1: device descriptor read/64, error -32

usb 1-1: new high-speed USB device number 4 using ehci-platform

usb 1-1: device not accepting address 4, error -32

usb 1-1: new high-speed USB device number 5 using ehci-platform

atkbd serio1: keyboard reset failed on 1c070000.kmi

usb 1-1: device not accepting address 5, error -32

usb usb1-port1: unable to enumerate USB device

Any ideas what can be going wrong here?

Thanks,

Justin

Here is the full boot log:

 

0