• Locked Locked
  • Replies 2 replies
  • Subscribers 119 subscribers
  • Views 3063 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to setup RVT on versatile express A9MPcore with RVDS 4.1?

Gaggery Tsai
Note: This was originally posted on 25th May 2011 at http://forums.arm.com

Does anyone try to use RVT + RVI to run trace capturing on Versatile Express A9MPcore with RVDS 4.1?  There is no ETM could be identified by auto-configuration, only PTM and ITM shown in scan chain. It looks like PTM is familiar with ETM in CoreSight PTM-A9 architecture. But when I tried to connect with analyzer, it got error message as below:

> analyzer,connect
Initialising Trace Support
Warning: PTM support is not available
Error V20017 (Vehicle): Logic Analyzer is not setup. See Output log for details.
Error: [TA0003] Could not initialise ETM trace support

  I can use the same procedure to connect on PB-A8 and got instruction and data trace but the same procedure failed on Versatile Express A9MPcore. Could anyone help me out? Thanks in advance.
Parents Reply Children
No data