Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.

We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.

Thank you for your understanding.

  • State Suggested Answer
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 119 subscribers
  • Views 443 views
  • Users 0 members are here
Options
Related

Dstream DS-5 is unreachable by the IDE and the web pages is empty

Michele Cirella

Hi all,
I have a DSTREAM DS-5 stopped to work, showing a connection failed from the IDE (fig.1) and when I tried to access using its IP it appears that nothing is running on it even if the led still light, and the web-panel showing a password panel instead of the Dstream led representation (fig.2).

Is it broken? Is there a way to recover it?


Fig. 1


Fig. 2

Parents
  • 0 Arm Employee Badge

    Hi

    My name is Stephen and I work at Arm.

    I assume that you've done the usual checks such as power-cycling the unit, checking cables, power supply, pinging it, firewalls, etc.

    Have you tried a factory reset?  Press and hold the reset button for over 10 seconds until the status LED flashes red, to enter recovery mode.

    If those don't help, then I suggest that you "Open a Support Case" using the link at the bottom of this page.  The Support team will be able to investigate further, and advise whether the unit needs to be returned for a repair.

    Stephen

Reply
  • 0 Arm Employee Badge

    Hi

    My name is Stephen and I work at Arm.

    I assume that you've done the usual checks such as power-cycling the unit, checking cables, power supply, pinging it, firewalls, etc.

    Have you tried a factory reset?  Press and hold the reset button for over 10 seconds until the status LED flashes red, to enter recovery mode.

    If those don't help, then I suggest that you "Open a Support Case" using the link at the bottom of this page.  The Support team will be able to investigate further, and advise whether the unit needs to be returned for a repair.

    Stephen

Children