• State Accepted Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 121 subscribers
  • Views 1432 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

MMU/MPU view/Commands view cannot be used with DS-5.

giorno2001

MMU/MPU view/command view cannot be used with DS-5.

I want to check the MMU settings, but I can't use the MMU/MPU view on the DS-5. "MMU information is not available" is displayed on the MMU/MPU view screen. Also, even though the debugger is connected (the program can be stepped through, etc.), I cannot enter any commands in the Commands view. It looks like it behaves like the debugger is not connected.

Since we are using the Cortex-A55 virtual prototyping model, we use the GDB debugger (aarch64-none-gdb) to connect the Cortex-A55 and DS-5.

What should I do to use the MMU/MPU view/command view?

Parents Reply Children
No data