This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cant see Dstream box in browse Debug Hardware Config IP

We are trying to connect from a Linux HPC virtual environment in a different subnet with firewall to a Dstream box on a subnet box in our physical location.  We can ping the box from the Linux env and I was also able to update the box firmware with the Debug Hardware Firmware Installer from the Linux env.  However we cannot see the box using the browse function in the Debug Hardware Config IP.  IT has assured us that the firewall is not blocking any communication to/from the Dstream box or the ARM DS-5 v5.25.0 eclipse environment.

My question is, should we be able to see and target this hardware from a different subnet?  What specific requirements are there for communication to work (that aren't required for Firmware updates?)

Regards,
Chris