We are trying to connect from a Linux HPC virtual environment in a different subnet with firewall to a Dstream box on a subnet box in our physical location. We can ping the box from the Linux env and I was also able to update the box firmware with the Debug Hardware Firmware Installer from the Linux env. However we cannot see the box using the browse function in the Debug Hardware Config IP. IT has assured us that the firewall is not blocking any communication to/from the Dstream box or the ARM DS-5 v5.25.0 eclipse environment.
My question is, should we be able to see and target this hardware from a different subnet? What specific requirements are there for communication to work (that aren't required for Firmware updates?)
Regards,Chris
Hi Ronan,
No worries and thanks again for your help with this.
Here's some of the contents from my os-release file:
NAME="Red Hat Enterprise Linux Server"VERSION="7.9 (Maipo)"ID="rhel"ID_LIKE="fedora"VARIANT="Server"VARIANT_ID="server"VERSION_ID="7.9"PRETTY_NAME="Red Hat Enterprise Linux Server 7.9 (Maipo)"
I am able to connect via the debug firmware installer from linux and read the firmware version from the box. I was unable to check in with IT yesterday to do some more port sniffing but this list should make it easier. I'll pass it along and see what they say.
Thanks,Chris
Thanks - that should be fine. From the 5.25 docs:https://developer.arm.com/documentation/dui0478/y/arm-ds-5-installation-and-system-requirements/system-requirements