• State Suggested Answer
  • Locked Locked
  • Replies 5 replies
  • Answers 1 answer
  • Subscribers 121 subscribers
  • Views 2318 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ARM processor PMU counters not configured

xiaoyuan

I met an issue when I do profile with DS, the number and instructions and L1/L2 cache is zero.

the warning info is

 

CONFIG_HW_PERF_EVENTS flag is yes. Any suggestions ?

$ zcat /proc/config.gz | grep CONFIG_HW_PERF_EVENTS

CONFIG_HW_PERF_EVENTS=y

Parents
  • 0 in reply to xiaoyuan

    Hi from the log, it looks like you are using version 7.9.0 of gatord, but recompiled to report that it is version 8.0.0, presumably so you can use it with a later version of Streamline?

    This is not explected to work; please first retry using the binary provided with Streamline 8.0.

    Thanks, Ben

Reply
  • 0 in reply to xiaoyuan

    Hi from the log, it looks like you are using version 7.9.0 of gatord, but recompiled to report that it is version 8.0.0, presumably so you can use it with a later version of Streamline?

    This is not explected to work; please first retry using the binary provided with Streamline 8.0.

    Thanks, Ben

Children
No data