• State Accepted Answer
  • Locked Locked
  • Replies 3 replies
  • Subscribers 119 subscribers
  • Views 5826 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Raspberry pi with streamline ds-5

Olfat

HEllo every one

I'm trying to collect some info from raspberry pi using streamline. I'm currently trying to figure a way to create gator and deamon but i noticed that raspberry pi is not recognized with the adb devices command. also it is not supported by Arm ds-5 but the arm 11 is supported.

MY question is how to use it with streamline after created the deamon and gator

thanks

Parents
  • 0

    Hello Marcelo,

    Than you very much for your guide. i already built my Damon and gator but when i try to use stream line it give me the error on the photo do i need to use any option " something to replace the adb forward command used with android?

    Screenshot from 2014-05-12 12:07:08.png

    Thanks

Reply
  • 0

    Hello Marcelo,

    Than you very much for your guide. i already built my Damon and gator but when i try to use stream line it give me the error on the photo do i need to use any option " something to replace the adb forward command used with android?

    Screenshot from 2014-05-12 12:07:08.png

    Thanks

Children
  • 0 Arm Employee Badge in reply to Olfat

    Hi,

    It seems Streamline cannot communicate with the gator daemon running on your target.

    Please check that gator daemon is running in the background, by using the 'ps' command.

    If you are connected to the Android target by USB, then you will have to forward ports and enter 'localhost' in the Address field instead of the IP address.

    Regards,
    Marcelo