• Locked Locked
  • Replies 4 replies
  • Subscribers 118 subscribers
  • Views 4984 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

CoreSight base addr and DAP port number

china liu
Note: This was originally posted on 28th March 2013 at http://forums.arm.com

hi, experts:
I am using a JTAG debugger.
It needs to set every cpu core's coresight base in the config page.
So, i have 2 questions:
1. no registers to record every cpu core's coresight base addr?
2. I also need to set DAP port number : 0/1
    So, why need to set DAP port number?
    I think it should be only 1 DAP port in ARM SOC.

best wishes,
Parents
  • Note: This was originally posted on 1st April 2013 at http://forums.arm.com

    hi, maheshp:
    Thanks for your response!
    Take a dual core ARM Soc as an example.
    Every core has its own CoreSight base address.
    And i have to set every core's CoreSight base address in an JTAG debugger.
    So, my question is:
    Is there a dedicated register for saving every CPU core's corresponding CoreSight base address?

    best wishes,
Reply
  • Note: This was originally posted on 1st April 2013 at http://forums.arm.com

    hi, maheshp:
    Thanks for your response!
    Take a dual core ARM Soc as an example.
    Every core has its own CoreSight base address.
    And i have to set every core's CoreSight base address in an JTAG debugger.
    So, my question is:
    Is there a dedicated register for saving every CPU core's corresponding CoreSight base address?

    best wishes,
Children
No data