Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.

We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.

Thank you for your understanding.

  • State Accepted Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 346 subscribers
  • Views 13315 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Getting ERROR "unknown mnemonics for UQSUB8 instruction"

Drashti Parikh

Hi community,

I have tried to compile the source code for openVG
I have given proper cross compiler which is required by the platform still I am getting the error of unknown mnemonics for the instruction UQSUB8

Environment:

- Linux platform

- CROSS COMPILE tool chain = aarch64-linux-gcc

- ARMv8-a architecture

Code snippet:

for (i = 0; i < 256; ++i) 
        { 
                c = lut[i]; 
                /* Extract alpha and clamp color components */ 
                inva = 0x01010101 * ((~c) & 0xFF); 
                c = _mali_osu_sataddu8(c, inva); 
                cpu_ptr[i] = _mali_osu_satsubu8(c, inva); 
        } 


MALI_STATIC_INLINE u32 _mali_osu_satsubu8(u32 x, u32 y) 
{ 
        u32 retval; 
        __asm__("UQSUB8 %0, %1, %2" 
                : "=r"(retval)      /* output */ 
                : "r"(x), "r"(y)    /* input */ 
               ); 
        return retval; 
}

Can you please suggest me how can I solve this issue?

Thanks,

DP

Parents
  • 0 Arm Employee Badge in reply to Drashti Parikh

    As per my earlier answer, if you have access to the OpenVG source code you must be a licensee, so please raise any questions about building the user-space parts of the Mali driver source for your platform via support@arm.com. We cannot provide support for the proprietary parts of our products on a public forum.

    FWIW I doubt the OpenVG driver will work on ARMv8; it was only ever released officially with ARMv7-A support (at the time it was released ARMv8 didn't even exist).

    Thanks,
    Pete

Reply
  • 0 Arm Employee Badge in reply to Drashti Parikh

    As per my earlier answer, if you have access to the OpenVG source code you must be a licensee, so please raise any questions about building the user-space parts of the Mali driver source for your platform via support@arm.com. We cannot provide support for the proprietary parts of our products on a public forum.

    FWIW I doubt the OpenVG driver will work on ARMv8; it was only ever released officially with ARMv7-A support (at the time it was released ARMv8 didn't even exist).

    Thanks,
    Pete

Children
No data