• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 5 replies
  • Subscribers 349 subscribers
  • Views 4896 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Does anyone use assembler only with an ARM MCU?

Peter Grey

I have only used assembler when working with MCU's. I can follow a C program but have not used it in any commercial product. Can anyone suggest a development platform to start off learning the ARM and C? I would probably work on a Cortex M4F as a start.

Thanks

Peter

Parents
  • 0 in reply to Yasuhiko Koumoto

    Hi

    Thanks for your input. I have selected the MSP432 from TI as my choice of a MCU. I know I can use either their IDE (CCS6) or IAR to do either assembler or C or both. I was initially going to use assembler so I could learn all about the device from a hardware point of view and then move onto C programming. It avoids a steep learning curve trying to do too much at once. I may be wrong?

    Thanks

    Peter

Reply
  • 0 in reply to Yasuhiko Koumoto

    Hi

    Thanks for your input. I have selected the MSP432 from TI as my choice of a MCU. I know I can use either their IDE (CCS6) or IAR to do either assembler or C or both. I was initially going to use assembler so I could learn all about the device from a hardware point of view and then move onto C programming. It avoids a steep learning curve trying to do too much at once. I may be wrong?

    Thanks

    Peter

Children
No data