• State Accepted Answer
  • Locked Locked
  • Replies 1 reply
  • Subscribers 349 subscribers
  • Views 1582 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cortex-M33/STM32U5 - unprivileged mode in secure not working?!

42Bastian Schick

I try run an unprivileged application in secure mode and get a strange behavior:

STM32U5 has TZ enabled, all application runs in secure mode.

1) LR = 0xffff_fff9, CONTROL = 1 => BX LR increments the SP, but all registers become 0 (including PC and XPSR!)

2) When setting CONTROL = 1 and executing SVC, SP is decremented correctly, but nothing is stored on the stack?

I check all errata I could find, but no hint.

If TZ is disabled, the system behaves normal.

0