Please note: We are aware of an issue affecting replies on the Arm Community forums, which may not be loading as expected.

We apologize for any inconvenience and appreciate your patience while we investigate and work to resolve the issue.

Thank you for your understanding.

  • State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 346 subscribers
  • Views 8738 views
  • Users 0 members are here
Options
Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I2S with ARM M0

sushil chauhan

Can we connect I2S lines in the arm M0? If so any references??

sushil

Parents
  • +1 in reply to sushil chauhan

    Perhaps some GPIO lines could be used? The processor is probably powerful enough to do the job without special hardware for buffering. I'd be inclined to search around and see if there is some Arduino or Raspberry Pi project that does the sort of thing you are interested in, it sounds like the sort of thing somebody has probably done.

Reply
  • +1 in reply to sushil chauhan

    Perhaps some GPIO lines could be used? The processor is probably powerful enough to do the job without special hardware for buffering. I'd be inclined to search around and see if there is some Arduino or Raspberry Pi project that does the sort of thing you are interested in, it sounds like the sort of thing somebody has probably done.

Children
No data