We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I download the original package, did not change anything and opened it using Vivado 2019.1. I assume this should be working out of the box.
When I tried to verify it, I see below error messages.
Anyone can see what did wrong here?
Thanks
---
[BD 41-2161] Unable to find interface <GPIO2> in cell <axi_gpio_0> while setting up interface connections during loading of BD file.
[IP_Flow 19-3461] Value 'reset' is out of the range for parameter 'RESET BOARD INTERFACE(RESET_BOARD_INTERFACE)' for BD Cell 'proc_sys_reset_base' . Valid values are - Custom
[IP_Flow 19-3461] Value 'qspi_flash' is out of the range for parameter 'QSPI Board Interface(QSPI_BOARD_INTERFACE)' for BD Cell 'axi_quad_spi_0' . Valid values are - Custom
[IP_Flow 19-3439] Failed to restore IP 'axi_quad_spi_0' customization to its previous valid configuration.
[IP_Flow 19-3439] Failed to restore IP 'Clocks_and_Resets/proc_sys_reset_base' customization to its previous valid configuration.
[BD 41-1273] Error running propagate TCL procedure: ERROR: [Common 17-39] 'set_property' failed due to earlier errors.
::xilinx.com_ip_axi_quad_spi_3.2::propagate Line 42
[BD 41-1273] Error running post_propagate TCL procedure: ERROR: [Common 17-39] 'set_property' failed due to earlier errors.
::xilinx.com_ip_proc_sys_reset_5.0::post_propagate Line 23
[BD 41-241] Message from IP propagation TCL of /axi_quad_spi_0: set_property error: Value 'qspi_flash' is out of the range for parameter 'QSPI Board Interface(QSPI_BOARD_INTERFACE)' for BD Cell 'axi_quad_spi_0' . Valid values are - Custom Customization errors found on 'axi_quad_spi_0'. Restoring to previous valid configuration. Failed to restore IP 'axi_quad_spi_0' customization to its previous valid configuration.
[BD 41-241] Message from IP propagation TCL of /Clocks_and_Resets/proc_sys_reset_base: set_property error: Value 'reset' is out of the range for parameter 'RESET BOARD INTERFACE(RESET_BOARD_INTERFACE)' for BD Cell 'Clocks_and_Resets/proc_sys_reset_base' . Valid values are - Custom Customization errors found on 'Clocks_and_Resets/proc_sys_reset_base'. Restoring to previous valid configuration. Failed to restore IP 'Clocks_and_Resets/proc_sys_reset_base' customization to its previous valid configuration.