• State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 351 subscribers
  • Views 3666 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can not configure RCC by using HSE as system clock source

MuhammedAlaa
Hello , i have been stuck in this code for 3 days , i am getting nowhere..... The second photo has the configuration of my Clock Tree , i am using stm32f429zi DISCO ....
the first photo shows the code i wrote to configure the RCC corresponding to the clock tree in the second photo .After all the code doesn`t work .. i am working on timer 1 using polling method . the led should be toggled every 10 seconds according to the prescaler . but the led is always on .. i tried to narrow down the problem by trying to decide what is the source of the problem my timer`s configuration or the RCC by running the internal RC Oscillator which is running on 16MHZ , and I did modify the prescaler value to be 15999 , and the led toggeled fine . so the problem comes from the RCC Peripheral any help please?