• State Accepted Answer
  • Locked Locked
  • Replies 21 replies
  • Answers 1 answer
  • Subscribers 351 subscribers
  • Views 46505 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cortex-M0: How to switch from one program to another

wshen

Hi,

In my Cortex-M0 project, there are two program images residing at different memory locations: 0x0000_0000 and 0x0010_0000.  Each program has its own vector table.  M0 will boot from the program at 0x0010_0000 then switch to the other program (0x0000_0000) at the end.

What is the correct way to switch to the porgram at 0x0000_0000?  I'm not sure whether the following instructions are correct or not.

     LDR     R6, =0x1                             ; set R6 to 0x0000_0001 due to Thumb mode

     LDR     R0, [R6]

     MOV     SP, R0

     LDR     R1, [R6, #4]

     BX      R1

Can someone please point me the right implementation?  Thanks a lot.

0