Architectures and Processors forum Need to know how to catch a signal interruption of the gpio on a beaglebone ?

State Accepted Answer
Locked Locked
Replies 4 replies
Subscribers 349 subscribers
Views 6467 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Need to know how to catch a signal interruption of the gpio on a beaglebone ?

Jerome Decamps - 杜尚杰 over 11 years ago

Hello,

I search the good way to catch a signal interruption of the gpio on a beaglebone

I have read a lot of sample about it but none seem work correctly,

is there somebody to explain me how to do this in a #C or python

code ?

Thanks for your help

Parents

0 Jerome Decamps - 杜尚杰 over 11 years ago

If found the answer, sorry for this question !
In reality the problem was from the pin 'int' on my cape presents malfunction

I tested my BEAGLEBONE by injecting electrical pulses on the gpio from a 1.5V battery AC works perfectly
Cancel
Vote up 0 Vote down

Cancel

Reply

0 Jerome Decamps - 杜尚杰 over 11 years ago

If found the answer, sorry for this question !
In reality the problem was from the pin 'int' on my cape presents malfunction

I tested my BEAGLEBONE by injecting electrical pulses on the gpio from a 1.5V battery AC works perfectly
Cancel
Vote up 0 Vote down

Cancel

Children

0 Alban Rampon over 11 years ago in reply to Jerome Decamps - 杜尚杰

Good job finding it and thanks for letting us all know!
Cancel
Vote up 0 Vote down

Cancel