• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 3 replies
  • Subscribers 350 subscribers
  • Views 7328 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AMBA design kit

Вячеслав

I have a question about components of amba design kit.

Is it correct design which contain arm cortex m3 with ahb-lite system bus, components bus matrix and ahb2apb bridge from amba design kit?

Diagram with components connection in design is attached.

AHB2APB.jpg
Parents
  • 0 Arm Employee Badge in reply to Вячеслав

    Yes, Many components in the AMBA Design Kit (ADK) can be used with the Cortex-M3 processor.

    However, ADK don't have any example system for Cortex-M processors. Also, there are more features in the CMSDK.

    In simple Cortex-M3 based systems there is no need for NIC-301. But it is likely that you have a AHB to APB bridge for APB peripherals.

    regards,

    Joseph

Reply
  • 0 Arm Employee Badge in reply to Вячеслав

    Yes, Many components in the AMBA Design Kit (ADK) can be used with the Cortex-M3 processor.

    However, ADK don't have any example system for Cortex-M processors. Also, there are more features in the CMSDK.

    In simple Cortex-M3 based systems there is no need for NIC-301. But it is likely that you have a AHB to APB bridge for APB peripherals.

    regards,

    Joseph

Children
No data