• State Accepted Answer
  • Locked Locked
  • Replies 4 replies
  • Subscribers 350 subscribers
  • Views 5943 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Modify SP register and PC register in Cortex-M1 using Keil

Juanea7

Hi,

I'm planning to do a bootloader for a Cortex-M1 processor but i'm having serious problems.

First of all, the Keil says it expect a ")" when writing this type of inline assembly:

        __asm__ __volatile__("mov sp,%0\n\t"
                "bx %1\n\t"
                : /* no output */
                : "r" (sp), "r" (pc)
                : "sp");
So it seems that it's not recognizing the assembly code.
On the other hand I just read that you cannot modify directly the value of the SP and PC register with inline assembly.
So I was wondering if someone could give me some hints on how to modify these registers to be able of code the bootloader.
Thanks in advance,
Juan
Parents Reply Children
No data