• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 10 replies
  • Subscribers 25 subscribers
  • Views 2347 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Morello Bring-up

Nick Lewis
On trying to bring up a Morello board the MCC reported
Warning: the PMIC image for this board must be updated. Please edit io_vxxxf.txt stored in \MB\HB10364A\ and set MBPMIC: to pms_0V85.bin

Press any key to continue...
I blindly did as suggested but there is no pms_0V85.bin in the directory so it failed to boot.
On the regular Neoverse there was this issue https://community.arm.com/oss-platforms/w/docs/604/notice-potential-damage-to-n1sdp-boards-if-using-latest-firmware-release with a link to a zip containing pms_0V85.bin. I installed this file and the warning went away.
However was this the correct thing to do on a new Morello board?
Parents Reply Children