• State Accepted Answer
  • +1 person also asked this people also asked this
  • Locked Locked
  • Replies 15 replies
  • Subscribers 137 subscribers
  • Views 11863 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

mali r5p0-06rel0 odroidxu3

Anand Moon

Hi All,

I would like to know how to integrate mali r5p0-06rel0 for OdroidXU3 board.

I have user TX011-SW-99002-r5p1-00rel1 along with chromebook-platform patch.

Has some body make it working on latest kernel.

-Anand Moon

Parents Reply Children
  • 0 in reply to Guillaume Tucker

    Hi,

    I'm having an issue with the 3.10.69 kernel on an ODROID-XU3, running a Ubuntu user land.

    I built the kernel from the repo linked earlier in the thread

    (https://github.com/ARM-software/linux/tree/odroidxu3-3.10.y-mali-midgard-r5p0)

    The kernel builds & boots successfully, and the mali_kbase module loads without complaint, but when I try and run any OpenCL code the application terminates with an Unknown OpenCL error.

    With strace I have narrowed this down to a missing /dev/mali0 sysfs handle, which doesn't make much sense as the kernel module is clearly loaded (according to lsmod anyway).

    The kernel module was built with the odroidxu3_defconfig file available and has options configured like so:

    $ grep MALI .config

    CONFIG_MALI_MIDGARD=m

    CONFIG_MALI_GATOR_SUPPORT=y

    CONFIG_MALI_MIDGARD_DVFS=y

    CONFIG_MALI_MIDGARD_RT_PM=y

    # CONFIG_MALI_MIDGARD_ENABLE_TRACE is not set

    CONFIG_MALI_MIDGARD_DEBUG_SYS=y

    CONFIG_MALI_EXPERT=y

    # CONFIG_MALI_DEVFREQ is not set

    CONFIG_MALI_DEBUG_SHADER_SPLIT_FS=y

    CONFIG_MALI_PLATFORM_FAKE=y

    CONFIG_MALI_PLATFORM_THIRDPARTY=y

    CONFIG_MALI_PLATFORM_THIRDPARTY_NAME="5422"

    # CONFIG_MALI_DEBUG is not set

    # CONFIG_MALI_NO_MALI is not set

    # CONFIG_MALI_TRACE_TIMELINE is not set

    # CONFIG_MALI_SYSTEM_TRACE is not set

    # CONFIG_MALI_GPU_TRACEPOINTS is not set

    I've tried a couple of combinations of options, but I can't seem to get /dev/mali0 to show up in the sysfs tree, despite the module clearly being loaded:

    $ lsmod | grep mali

    mali_kbase 236932 0

    I have the appropriate binary drivers for the T62X (r5p0-06rel0) installed.

    Neither the X11 or fbdev versions make any difference. I don't imagine either of those have any chance of working with the /dev/mali0 device missing.

    Does anyone have any further suggestions for what I can try?

    There are these two potentially relevant message relating to the Mali device in dmesg:

    [    7.895860] [c6] mali 11800000.mali: Invalid irq res name: '/mali'

    [    7.900908] [c6] mali: probe of 11800000.mali failed with error -22

    Thanks.