• Locked Locked
  • Replies 10 replies
  • Subscribers 137 subscribers
  • Views 10703 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Debugging Mali driver in 3.4 kernel in Origen

Sangwook Lee
Note: This was originally posted on 26th April 2012 at http://forums.arm.com

Hello

I am trying to make ICS Android (Mali) work in Origen with 3.4 kernel

Now  as using Mali driver, gralloc_ump r2p4-02rel in 3.4 kernel with the following Android branch.
repo init -u git://android.git.linaro.org/platform/manifest.git -b linaro_android_4.0.4 -m tracking-origen.xml

I have the following errors:

*******************************************************************************
[   15.225000] MALI PHYSICAL RANGE VALIDATION ERROR!
[   15.235000] We failed to validate a Mali-Physical range that the user-side wished to map in
[   15.245000] It is likely that the user-side wished to do Direct Rendering, but a suitable
[   15.250000] address range validation mechanism has not been correctly setup
[   15.260000] The range supplied was: phys_base=0x6D900000, size=0x004B0000
[   15.270000] Please refer to the ARM Mali Software Integration Guide for more information.
[   15.275000] *******************************************************************************

In my opinion, it seems that user space library call ioctl command with in-proper argument. 
    ioctl command (MALI_IOC_MEM_MAP_EXT)  with the wrong params: phys_base=0x6D900000, size=0x004B0000

In addition, currently I didn't  add UMP remap call  in  Framebuffer drivers.  Is it possible reason ?


Thanks
Sangwook
Parents
  • Note: This was originally posted on 30th April 2012 at http://forums.arm.com

    Hi Sangwook,

       With just the log messages, I can only guess the obvious. The MMU is not being setup correctly. I am not familiar with the initialization phase of the Mali driver but I think it should also initialize the MMU. Could you check the driver init?  I remember that linaro had a version of Mali (r2p3?) working with an older kernel(3.0?). It might  be worth checking if the same driver works (with new kernel)and try figuring out the differences.

    In the mean time, I will also enquire with more people to see if there is an obvious problem.

    Regards
    Karthik
Reply
  • Note: This was originally posted on 30th April 2012 at http://forums.arm.com

    Hi Sangwook,

       With just the log messages, I can only guess the obvious. The MMU is not being setup correctly. I am not familiar with the initialization phase of the Mali driver but I think it should also initialize the MMU. Could you check the driver init?  I remember that linaro had a version of Mali (r2p3?) working with an older kernel(3.0?). It might  be worth checking if the same driver works (with new kernel)and try figuring out the differences.

    In the mean time, I will also enquire with more people to see if there is an obvious problem.

    Regards
    Karthik
Children
No data