• Locked Locked
  • Replies 9 replies
  • Subscribers 137 subscribers
  • Views 11047 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

eglGetError()

Doğaner Sümerkan
Note: This was originally posted on 3rd May 2011 at http://forums.arm.com

Hello,
i just installed opengl es 2.0 emulator and built cube example by vs2008, however, i get the foolowing error.

"eglGetError()=12293 (0x00003005) at line 245"

could you please tell me if you have any opinion about the problem?

thanks.

*my gpu is nvidia geforce 425m
Parents
  • Note: This was originally posted on 17th July 2011 at http://forums.arm.com


    Hi Lorenzo,

    I get the same problem; my environment is a 32-bit Windows XP laptop with an Nvidia Quadro FX 360M graphics card, using driver version 6.14.11.7575.  I'm building using Eclipse and a Cygwin-gcc toolchain.  The change that you suggested results in a 'Could not open display' message from line 217.

    Ta,
    Mark



    Hi Medge,
    line 217 should not be executed with the _WIN32 definition. Are you sure you have moved the #endif at line 220, after the if(!hDisplay) entire block?
    Unless you want to use cygwin with a X11 server on Windows, in this case the problem could be different.
Reply
  • Note: This was originally posted on 17th July 2011 at http://forums.arm.com


    Hi Lorenzo,

    I get the same problem; my environment is a 32-bit Windows XP laptop with an Nvidia Quadro FX 360M graphics card, using driver version 6.14.11.7575.  I'm building using Eclipse and a Cygwin-gcc toolchain.  The change that you suggested results in a 'Could not open display' message from line 217.

    Ta,
    Mark



    Hi Medge,
    line 217 should not be executed with the _WIN32 definition. Are you sure you have moved the #endif at line 220, after the if(!hDisplay) entire block?
    Unless you want to use cygwin with a X11 server on Windows, in this case the problem could be different.
Children
No data