Jlink Segger

Hi, 

Can you please tell me how to put the probe in CMSIS-DAP mode?

Is that a software setup external to VS Code?

In previous ARM told they were working at a new driver.

Now you tell me it is possible to make it work. Great

Best Regards

Hi, 

Can you please tell me how to put the probe in CMSIS-DAP mode?

Is that a software setup external to VS Code?

In previous ARM told they were working at a new driver.

Now you tell me it is possible to make it work. Great

Best Regards

This is described here:

https://kb.segger.com/J-Link_CMSIS-DAP_mode

If you need assistance with this process, please contact Segger.

Thanks very much for reply.

As I told you I had already conversation with ARM support in which they told that using VSCode with JLink but not (ARM driver) the result is that part of the code is not programmed.
They have told me their support for JLINK i.e. making a driver like the one on Keil to use under VSCode, should be in 3 - 6 months.

You know suggest me this mode. Do you think it solve the problem?

Best Regards