I am trying to implement the RNDIS on LPC43S57. I have taken the example code from the keil package https://www.keil.com/pack/Doc/MW/USB/html/dev_cdc_acm_rndis_bridge.html .
The RNDIS port is detected but it is not able to establish the communication. I have also installed the driver present the example project folder.
Could any one help me out on this.
The above issue is resolved
Thanks for letting us know Punith. Are you able to share the solution you found?
It was a driver issue. I changed the PID and the driver got automatically installed.
Thank you sharing this with us :)