• State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 23 subscribers
  • Views 2267 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error: selected processor does not support `msr psp,r3' in Thumb mode

Ersk

Hi all

I have the following setup:

  • Arm GNU toolchain v. 11.2 (activated it in uVision under Manage -> Project Items -> Folders/Extensions)
  • Keil uVision V5.37
  • Device: ARMCM33 (no DSP Instructions, no Floating Point Unit, no TrustZone)
  • Run-Time Environment
    • CMSIS -> Core (v. 5.6.0)
    • Device -> Startup (C Startup) (v 2.1.0)

with an empty main.cpp:

int main(void)
{
  return 0;
}

and I am getting the following error:

compiling startup_ARMCM33.c...
RTE/Device/ARMCM33_DSP_FP/startup_ARMCM33.c: In function 'Reset_Handler':
RTE/Device/ARMCM33_DSP_FP/startup_ARMCM33.c(134): warning: implicit declaration of function '__set_MSPLIM'; did you mean '__set_MSP'? [-Wimplicit-function-declaration]
RTE/Device/ARMCM33_DSP_FP/startup_ARMCM33.c(135): warning: implicit declaration of function '__set_PSPLIM'; did you mean '__set_PSP'? [-Wimplicit-function-declaration]
C:\Users\ersk\AppData\Local\Temp\ccMzeu8x.s: Assembler messages:
Error: C:\Users\ersk\AppData\Local\Temp\ccMzeu8x.s:86: Error: selected processor does not support `msr psp,r3' in Thumb mode

Below the files that get pulled in, not sure why there is nothing under CMSIS:

Is there anything that I can try out to help getting to the bottom of this? Do I have to write my own ld script on top of gcc_arm.ld?

Cheers

Parents
  • 0

    I am not a Windows user, but do use the GNU toolchain. I do see from your directory (folder!) paths that you are including

    ARMCM33_DSP_FP/startup_ARMCM33.c

    I have a hunch that with the GNU toolchain you actually want

    ARMCM33_DSP_FP/GNU/startup_ARMCM33.S

    i.e. a file that live alongside the gcc_arm.ld file.

    I do not see the corresponding .c file in my drop of the CMSIS_5 files from ARM, so I think you use the .S file in its place.

Reply
  • 0

    I am not a Windows user, but do use the GNU toolchain. I do see from your directory (folder!) paths that you are including

    ARMCM33_DSP_FP/startup_ARMCM33.c

    I have a hunch that with the GNU toolchain you actually want

    ARMCM33_DSP_FP/GNU/startup_ARMCM33.S

    i.e. a file that live alongside the gcc_arm.ld file.

    I do not see the corresponding .c file in my drop of the CMSIS_5 files from ARM, so I think you use the .S file in its place.

Children
No data