Hello,
My project involve FATFS and USB MSC. We started this project with STM32L073 MCU. Than, we changed our MCU with STM32L072. After changing MCU, we faced the problem. Now, I can build my code without problem. But, program doesnt reach the main.
Before i send this post, I read some advice about this issue.
Firstly, i checked heap in my startup file. Increasing heap didnt work in my case but, strange thing is that increasing heap doesnt increase ram usage. I doubt about this. As i know, increasing heap usage should increase ram usage.
In disassembly screen, there is a branch line like below. This branch line sources of infinite loop.
0x1FF001EC F7FFFF7A BL.W 0x1FF000E4
0x1FF001F2 2800 CMP r0,#0x00
0x1FF001F4 D0B6 BEQ 0x1FF00164
I need your advices about how can i fix this or which part of project do i check?
Thank you
Make sure the BOOT0 pin is LOW
Double check the address you're building code for