• State Accepted Answer
  • Locked Locked
  • Replies 11 replies
  • Subscribers 22 subscribers
  • Views 6202 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problems with setting up the event recorder for LPC1769

Jan Claussen

I've been struggling to set up the event recorder. I narrowed the problem down to the RAM that I am allocating to the device. As soon as I do, the ethernet connection of the controller stops working. 

Here is my configuration

I get no complaints or warnings. The RAM section from 0x20000000 to 0x20008000 is not reserved, but as soon as I restart the controller ethernet does not connect and thus nothing is working anymore. Any ideas?

0