I am not able to interface LCD16X2 with MS51FB9AE nuvoton MCU which is similar to N76E003, can anybody help me with that?.
my lcd pins connection is as follows:
RS - P04
EN - P03
D4 - P01
D3 - P00
D2 - P10
D1 - P11my lcd pins connection is as follows: RS - P04
D1 - P11
https://www.electronicwings.com/8051/lcd16x2-interfacing-in-4-bit-mode-with-8051#:~:text=16x2%20LCD%20Display-,4-bit%20Mode,-bit%20(nibble)%20format.&text=Only%204%20data%20(D4%20-%20D7,GPIO%20Pins%20of%20the%20controller.
Followed this tutorial, but here he has used P1 as data pins, but in my PCB I have used two different port pins how to write code for that ?
These are my pins, I am not getting any solution
Go on.
Toggling one pin is the same as toggling another.
Did you not prototype this before committing to a PCB design?
Seems a rather bizarre choice of pins
It's Working now, this is prototype PCB only
That's good.
So, for the benefit of others who may come along with the same question, please describe what you had to do to make it work.