• State Accepted Answer
  • Locked Locked
  • Replies 8 replies
  • Subscribers 23 subscribers
  • Views 6435 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How can I use GPIOA and GPIOB at the same time?

Ohhwow

This is the program I'm trying to run. It's actually a program for a running light but for GPIOB's LED which is connected for the first LED just stayed on all the time, while the other 3 LED which is at GPIOA is is a running light sequence.

#include "stm32f4xx.h"
void delayMs(int n);

int main(){
RCC -> AHB1ENR |= 3;
GPIOA -> MODER &= ~0x0000FC00;
GPIOA -> MODER |= 0x00005400;
GPIOB -> MODER &= ~0x00003000;
GPIOB -> MODER |= 0x00001000;

while(1){
GPIOB->BSRR |= 0x004000A0;
delayMs(500);
GPIOA->BSRR |= 0x00800060;
delayMs(500);
GPIOA->BSRR |= 0x004000A0;
delayMs(500);
GPIOA->BSRR |= 0x002000C0;
delayMs(500);
}
}

void delayMs (int n){
int i;
for(; n>0; n--)
for(i=0; i<3000; i++);
}

Can someone help me?

Parents
  • 0 in reply to Westonsupermare Pier

    Oh I see, the coding for the LED for PB6 and LED for PA6 interfered with each other. I have tried your code and run it, and yeah, it works but after the execution of the PB6 OFF codes, the LED turns back on. Since I wanted the LED to turn off, so I copied the coding for PB6 ON after that which fixed the problem.

    while(1){
    GPIOB->BSRR = 0x00000040; // PB6 ON (LED OFF)
    delayMs(500);
    GPIOB->BSRR = 0x00400000; // PB6 OFF (LED ON)
    delayMs(500);
    GPIOB->BSRR = 0x00000040; // PB6 ON (LED OFF)
    delayMs(500);
    GPIOA->BSRR = 0x00800060;// PA7 OFF, PA5,PA6 ON
    delayMs(500);
    GPIOA->BSRR = 0x004000A0;
    delayMs(500);
    GPIOA->BSRR = 0x002000C0;
    delayMs(500);
    }

    Thank you so much. I really appreciated the help you guys have given me. =D

Reply
  • 0 in reply to Westonsupermare Pier

    Oh I see, the coding for the LED for PB6 and LED for PA6 interfered with each other. I have tried your code and run it, and yeah, it works but after the execution of the PB6 OFF codes, the LED turns back on. Since I wanted the LED to turn off, so I copied the coding for PB6 ON after that which fixed the problem.

    while(1){
    GPIOB->BSRR = 0x00000040; // PB6 ON (LED OFF)
    delayMs(500);
    GPIOB->BSRR = 0x00400000; // PB6 OFF (LED ON)
    delayMs(500);
    GPIOB->BSRR = 0x00000040; // PB6 ON (LED OFF)
    delayMs(500);
    GPIOA->BSRR = 0x00800060;// PA7 OFF, PA5,PA6 ON
    delayMs(500);
    GPIOA->BSRR = 0x004000A0;
    delayMs(500);
    GPIOA->BSRR = 0x002000C0;
    delayMs(500);
    }

    Thank you so much. I really appreciated the help you guys have given me. =D

Children
No data