• State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 25 subscribers
  • Views 1996 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

I'm using the FRDM-KL25Z board to connect servo motor for a project. But I get an error that said error: unknown type name 'Servo'. What is the correct file to #include ("#include "...".h) the file. Im using Keil microvision soft

Rayg

#include "MKL25Z4.h"

Servo myservo;

static int pos = 0;

void setup(){
myservo.attach(2) //PTA1 pin 2
}

void loop(){
for (pos = 0; pos <= 180; pos += 1){
myservo.write(pos);
}

for (pos = 180; pos >= 0; pos -= 1){
}
}

Parents
  • 0

    Looks like you have simply imported an Arduino Servo sketch (incompletely copied from here?). It's missing more than a few pieces, including the #include "Servo.h" that would define the Servo class (which would be part of the Servo package). The FRDM is not an Arduino and the Arduiino development environment hides a lot of boilerplate code that you would have to supply to make this work. All is not lost, though -- try searching for FRDM-KL25Z arduino on Google and you'll find some useful resources to help. For example, Planet Arduino.  

Reply
  • 0

    Looks like you have simply imported an Arduino Servo sketch (incompletely copied from here?). It's missing more than a few pieces, including the #include "Servo.h" that would define the Servo class (which would be part of the Servo package). The FRDM is not an Arduino and the Arduiino development environment hides a lot of boilerplate code that you would have to supply to make this work. All is not lost, though -- try searching for FRDM-KL25Z arduino on Google and you'll find some useful resources to help. For example, Planet Arduino.  

Children
No data