• State Suggested Answer
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 22 subscribers
  • Views 3814 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to debug stm32-Cortex M in production mode for stm32mp157-EV1?

Mahsa

Hi guys

I would like to debug stm32f7 on Stm32mp157_EV1 board via stlink.

 

according to page 5 of http://www.keil.com/appnotes/files/apnt_319_v1.1.pdf

i connected st link then went to Project, Selected St-link and then went to setting dialog,

the text box for AP was disable and didnt show any thing!!!!

It is written in the help file: "On the Pack tab, make sure “Debug Description Enable” is unchecked "

 When i unchecked the enable pack in pack tap, showed not found target in SWDevice!!!

then when i check pack, device find.

-MDK version: 5.29.00

-30 days Licence

 

i dont know what shall i do !

Thanks in advance

Any help would be greatly appreciated

0