• State Not Answered
  • Locked Locked
  • Replies 1 reply
  • Subscribers 23 subscribers
  • Views 1389 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to enter STOP mode when Jlink is connected via SW?

alivexiaoluo

Hi,I want to know the reason that the STM32F103RE can not enter stop mode when Jlink is connected via SW.

If the connection is lost and reset the STM32F103RE, it enter stop mode well.

Parents
  • 0

    How, exactly, do you determine that it "can not enter stop mode"

    Is you software disabling it?

    See the ST User Manual for the behaviour of low-power modes when in Debug mode ...

    If the CPU were to stop, then the J-Link connection would fail

Reply
  • 0

    How, exactly, do you determine that it "can not enter stop mode"

    Is you software disabling it?

    See the ST User Manual for the behaviour of low-power modes when in Debug mode ...

    If the CPU were to stop, then the J-Link connection would fail

Children
No data