Keil forum Using ARM uVision5 IDE with Cortex-M4 of a Colibri VF61

State Suggested Answer
Locked Locked
Replies 1 reply
Answers 1 answer
Subscribers 24 subscribers
Views 1281 views
Users 0 members are here

Options

Related

How was your experience today?

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Using ARM uVision5 IDE with Cortex-M4 of a Colibri VF61

vix over 5 years ago

Is it possible to use uVision5 to compile and debug (ULINKpro) code for Cortex-M4 of a Colibri-VF61 board?

In the pack installer window I see that Colibri-VF61 board is listed but no examples are provided.

Top replies

rkopsch over 5 years ago +1 suggested

No, this is not possible. This Cortex-A5 & Cortex-M4 solution requires to select the Arm Development Studio: https://developer.arm.com/tools-and-software/embedded/arm-development-studio http://www...

Parents

0 rkopsch over 5 years ago

No, this is not possible.

This Cortex-A5 & Cortex-M4 solution requires to select the Arm Development Studio:

https://developer.arm.com/tools-and-software/embedded/arm-development-studio

http://www.keil.com/distis/
Cancel
Vote up +1 Vote down

Cancel

Reply

0 rkopsch over 5 years ago

No, this is not possible.

This Cortex-A5 & Cortex-M4 solution requires to select the Arm Development Studio:

https://developer.arm.com/tools-and-software/embedded/arm-development-studio

http://www.keil.com/distis/
Cancel
Vote up +1 Vote down

Cancel

Children

No data