• State Suggested Answer
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 23 subscribers
  • Views 1091 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

SPI comunication between e10-433ms and Stm32?

Mr. Khoi

How to use spi comunication to interface between e10-433MS RF and STM32F1xxx?

  • 0

    How to interface anything to anything else:

    http://www.8052mcu.com/forum/read/160143

    There are 2 parts to this question:

    1. How to use the SPI controller on the STM32F1xxx.
      This has nothing to do with Keil or ARM - it will be answered in the ST documentation.
      ST provide examples for using each of the peripherals on all of their controllers.
      The operation of the STM32's SPI controller is not affected by what device(s) you connect to it.
       
    2. How to use the SPI interface on the e10-433MS
      This has nothing to do with Keil or ARM - it will be answered in the e10-433MS documentation.
      The operation of the e10-433MS's SPI interface is not affected by what Master is driving the bus.