We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I am new to ARM and I am trying to produce 1 second delay using timer 0 in LPC2148. But in debug session in Keil, it is giving delay of 4 seconds with 15MHz and 5 seconds with 12 MHz. What is the issue ?
Here is my code.
#include <lpc214x.h> int main() { IODIR0 = 1; // P0.0 is output pin IOSET0 = 1; // P0.0 is high T0PR = 15000000 - 1; T0TC = T0PC = 0; T0TCR = 1; // start do { while(T0TC == 0); T0TC = 0; IOCLR0 = 1; // P0.0 is low while(T0TC == 0); T0TC = 0; IOSET0 = 1; // P0.0 is high } while(1); }
Westonsupermare Pier said:Perhaps you should invest is some current hardware
Indeed.
kamalpancholi - Not least because most current chips these days are available with low-cost dev boards that include a debug probe - so you can throw away all the doubts & uncertainties of simulators, and just use the actual hardware!
Westonsupermare Pier said: I don't suspect the simulator is cycle accurate for things outside the core.