• State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 22 subscribers
  • Views 2949 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with landtiger internal debugger board

moh you

HI, I have keil Version 4.74 and Segger v5.00e after connecting my landtiger board (LPC1768 as developer core and stm32f103c8t6 as debugger chip for j-link). it asked to update the firmware but after that I'm not able to connect to my board and download code to flash memory and says

DLL: V5.00e, compiled Jun 23 2015 18:28:39
Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04
Hardware: V7.00
S/N : xxxxxxxx
Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull

* JLink Info: TotalIRLen = ?, IRPrint = 0x..000000000000000000000000
Error: Flash Download failed - Target DLL has been cancelled

Here I put the image of options and Error message
[IMG]" href= "anonfiles.co.uk/image.phpanonfiles.co.uk/image.php[/IMG]
[IMG]" href= "anonfiles.co.uk/image.phpanonfiles.co.uk/image.php[/IMG]

I would appreciate if you help me to fix the board

Parents
  • 0

    So the processor on the board is non-responsive to JTAG/SWD connectivity...

    Would suggest you talk the board vendor, review the board documentation and schematics to understand what your configuration/control options are, and review your chip documentation to understand it's boot and startup options.

Reply
  • 0

    So the processor on the board is non-responsive to JTAG/SWD connectivity...

    Would suggest you talk the board vendor, review the board documentation and schematics to understand what your configuration/control options are, and review your chip documentation to understand it's boot and startup options.

Children
No data