#include<softuart.h> #include<stdio.h> #include<reg51.h> void uart_init(); sbit sw=P1^7; unsigned char rx(); code unsigned char rd[] = "AT+CMGR=1"; code unsigned char ne[] = "AT+CNMI=2,2,0,0,0"; unsigned int r=0,m=0,s1=0,n1=0,f1=0,m2=0; unsigned char gs,mes_dat[]=0,mess[]=0; extern void lcd_init(); void lcd_cmd(unsigned char); void lcd_data(unsigned char); //void wait(); void gsm_delay(unsigned int); unsigned char txt[]="AT+CMGF=1"; unsigned char no[] ="AT+CMGS=\"9940151239\""; unsigned char del[]="AT+CMGDA=\"DEL ALL\""; unsigned char sen[]="SENSOR"; void send_no(); void new_mess(); void gsm_read(); void delete(); void gsm_read(); void mode(); unsigned char rx(); unsigned char w, re,rx_data; void tx(unsigned char); void serial(void) interrupt 4 { if(TI==1) { TI=0; SBUF = '\0'; //ES=0; } else if(RI==1) { rx_data = SBUF; if(rx_data=='+') { do { mess[m2] = rx_data; m2++; RI=0; }while(rx_data=='T'); } RI = 0; } } void main() { uart_init(); lcd_init(); mode(); new_mess(); // delete(); while(1) { IE = 0x90; m = 0; r = 0; s1 = 0; m2 = 0; re = rx_data; if(re=='+') { RI = 0; if(SBUF=='C') { lcd_data('1'); RI = 0; if(re=='M') { RI=0; lcd_data('2'); if(re=='T') { RI=0; do { gs = re; RI = 0; }while(gs!=0x0a); do { gs = re; RI = 0; }while(gs!=0x0a); m=-1; do { m = m+1; mes_dat[m] = re; RI = 0; }while(mes_dat[m]!=0x0d); mes_dat[m] = '\0'; m=0; lcd_cmd(0x01); lcd_cmd(0x80); while(mes_dat[m]!='\0') { lcd_data(mes_dat[m]); m++; } } } } } while(sw==1); m2=0; while(mess[m2]!='T') { //lcd_data(mess[m2]); tx(mess[m2]); m2++; } send_no(); while(sen[s1]!='\0') { putc(sen[s1]); s1++; } putc(0x1a); lcd_data('L'); gsm_delay(1000); gsm_delay(1000); gsm_delay(1000); } } void new_mess() { n1=0; while(ne[n1]!='\0') { putc(ne[n1]); n1++; } putc(0x0a); putc(0x0d); gsm_delay(1000); } void mode() { f1 = 0; while(txt[f1]!='\0') { putc(txt[f1]); f1++; } putc(0x0a); putc(0x0d); gsm_delay(1000); } void uart_init() { TMOD = 0x20; TH1 = -3; SCON = 0x50; TR1 = 1; //IE = 0x90; } /*unsigned char rx() { unsigned char rec; while(RI==0); rec = SBUF; RI = 0; return rec; } void delete() { unsigned int d ; d=0; while(del[d]!='\0') { putc(del[d]); d++; } putc(0x0a); putc(0x0d); gsm_delay(1000); } */ void send_no() { unsigned int s=0; while(no[s]!='\0') { putc(no[s]); s++; } putc(0x0a); putc(0x0d); } /*void gsm_read() { m=0; r=0; lcd_data('R'); while(rd[r]!='\0') { putc(rd[r]); r++; } putc(0x0a); putc(0x0d); } */ void gsm_delay(unsigned int k) { unsigned int i,j; for(i=0;i<=k;i++) for(j=0;j<=1273;j++); } void tx(unsigned char tx_data) { SBUF = tx_data; while(TI==0); TI=0; }
Yes, most people who get complaints about having forgotten the pre tags do not go back to the editor, but reposts from the previous post, including multiple source lines merged at random places.
Indeed.
And, again, didn't bother to pay attention to the preview!
Hardly surprising, then, that the code does not work.