• State Not Answered
  • Locked Locked
  • Replies 17 replies
  • Subscribers 22 subscribers
  • Views 5113 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

C8051F120 Debug simulation on Keil

pak p

Hi,

I use Keil to simulate C8051F120 but I cannot view the all peripherals of MCU (No hardware debug). I can view all peripherals if I use C8051F005. Anyone know about it? Am I missing something?

Thanks,
pak

Parents
  • 0 in reply to Jonny Doin

    In addition to that, a good set of bench equipment are also invaluable. I use a multitrace digital storage oscilloscope much more than the on-chip debug after the thing learned to walk and talk. Especially in the 8051, I always have a few pins used as hardware debug flags to monitor and validate the real hardware response.

Reply
  • 0 in reply to Jonny Doin

    In addition to that, a good set of bench equipment are also invaluable. I use a multitrace digital storage oscilloscope much more than the on-chip debug after the thing learned to walk and talk. Especially in the 8051, I always have a few pins used as hardware debug flags to monitor and validate the real hardware response.

Children
No data