• State Not Answered
  • Locked Locked
  • Replies 13 replies
  • Subscribers 22 subscribers
  • Views 3135 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Reformat

Tri Jatmiko

Dear All,

How to automatically reformat our code in µVision2 ? so that the code will have proper tabs to view it nicely.
I have µVision2 V2.20a, but I can not find it. I only find "Go to matching brace" which is very useful too of course.

I see this reformat feature in a freeware c editor/compiler such this http://www.cs.virginia.edu/~lcc-win32/

thanks

Parents
  • 0 in reply to Andy Neil

    Wrong Andy;
    You can download uV3 from the Keil website. Install uV3 and you can still select either uV3 or uV2 to start your project.
    My last update from Keil included uV3 as an option.
    Also, you can download CARM or PK166 eval that contains uV3. Either eval will install uV3 and it will be available to PK51.
    You are right, the advanced edit features of uV3 are not available in uV2.

Reply
  • 0 in reply to Andy Neil

    Wrong Andy;
    You can download uV3 from the Keil website. Install uV3 and you can still select either uV3 or uV2 to start your project.
    My last update from Keil included uV3 as an option.
    Also, you can download CARM or PK166 eval that contains uV3. Either eval will install uV3 and it will be available to PK51.
    You are right, the advanced edit features of uV3 are not available in uV2.

Children
  • 0 in reply to Bradford Al

    "You can download uV3 from the Keil website."

    That was my point: it's not (well, it wasn't) included with the C51 package - you had to download it separately, and then install it separately.

    Having done that, I think it was some of the Help/Books features that didn't work properly - it was looking in the wrong folders, or something.
    Maybe it's all fixed now...