serial addpter fro si labs

If you are attempting to multiplex the C2 bus lines for some reason, please be aware that the C2CLK line will drive very little capacitance.
No need, that SILabs software is "multiple instance". I am, on occsion running 3 EC2s from one PC. As usual with SILabs software, there are a few "irritations" such as "open file" not necessarily directed to the files with that particular EC2.

One question: while I am reluctant to change horses midstream, I prefer the problems you know to unknown features, is "multiple instances" possible using Keil to dribe EC2s?.

Erik

If you are attempting to multiplex the C2 bus lines for some reason, please be aware that the C2CLK line will drive very little capacitance.
No need, that SILabs software is "multiple instance". I am, on occsion running 3 EC2s from one PC. As usual with SILabs software, there are a few "irritations" such as "open file" not necessarily directed to the files with that particular EC2.

One question: while I am reluctant to change horses midstream, I prefer the problems you know to unknown features, is "multiple instances" possible using Keil to dribe EC2s?.

Erik

Erik:

From the settings box for the SiLabs driver, it looks like you can select different EC2 pods from inside uVision3.

It also looks like you can select different devices on a single JTAG chain.

I don't have the hardware to test this right now, it appears that they intend to provide the ability to run multiple instances, from uVision3.

SJC