What's the trick to make the C51 simulator increment timers in realtime? Ive tried setting the xtal value appropriately, on the target panel. (I just need the simulation's blink led freq to have the same period as the real target) Peter
That being said, the comments about getting an ICE might not be a bad idea. There are some EXTREMELY inexpensive ICEs out there that will do this sort of thing. Of course, if your target board doesn't even exist yet, that could be a bit of a wrinkle. Not necessarily, My Ceibo ICEs for the XA, the standard '51 and the x2 '51 (but not for the LPC) work beautifully without a "target board". Erik
erik, True enough... I think most ICEs will work in a targetless mode of some sort. Visualizing a blinking LED with them as Peter had originally asked, however, might be somewhat difficult. :)
not really, the Ceibo's have a connector for each port and a row of led's with an identivcal connector, you plug in a little cable and a port has LEDs on all pins Erik