I am trying to output the "hello world" example onto the PhilipsLPC2129 uC using the Keil EVB and after uploading the hex file onto the uC in the Flash Utility, I go to hyperterminal and nothing happens. Does anyone know what I could be doing wrong? I set the baud rates both to 9600 and configured everything correctly, I believe.
I recommend that you start with the example in the folder Keil\ARM\...Boards\Keil\MCB2100\Blinky. In the MCB2100.CHM user's guide (available also at: http://www.keil.com/mcb2100) you find the setup for Hyperterminal under the section: Running the Blink Example - View Serial Output.