I am using 2 Boards with the same layout (C167CR-LM, 1MB Flash, 256K RAM) for testing. No my problem is: ----------------- With the first Board downloading the programm in RAM with MON166 using the Bootstrap-Mode works fine. I can start and stop and proceed the programm as often as i want to. With the 2nd Board I can download the programm but after starting it (sometimes immedially after downloading) the connection to the board is lost and sometimes MON166 says: "CANNOT WRITE BREAKPOINT" If I write the programm into the flash on both boards everything works fine. But 'cause both Boards are the same It couldn't be an error in the Config.INC/Start167.a66, could it? Has anybody an idea what the cause could be? (I have already done a RAM-Test but everything seems to be ok) Thanks Torsten
Thanks a lot to all of you! There where 3 unitialized Variables and 2 macros without braces:
#define NOVRAM_ADDR 0x200000 #define NOVRAM_SIZE 0x2000
#define NOVRAM_ADDR (0x200000) #define NOVRAM_SIZE (0x2000)