We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
J-Link V6.12d API Warning Debugger problem discovered: The debugger has set two breakpoints at the same address xxxxxx. ------
I use Tessy to do unit test work with Keil uvision. The breakpoint is set by the test software Tessy at its communication function. In fact, it can run well at Keil Simulator without Jlink. And now this warning appears with Jlink connecting. Anyway, If I keep clicking the OK of the warning to go on the test, it can go to the last.
I wonder is there any suggestion to solve this , or how can I just simply disable the warning?
HA They say ask Keil... And there was a question here however without an answer: devzone.nordicsemi.com/.../keil---debugger-set-two-breakpoints-at-same-address
That's getting to be a bit of a reach.
Most probable is that the test tool is trying to set break-points to different lines in the code, but either those lines don't generate code, or the optimizer re-arranges or folds things in such a way that the two requests fall on exactly the same code address. If the tools is trying to do this as a way of single stepping or profiling, then it really should be sufficiently aware that the line-to-address translation isn't always going to result in a unique address, or in-order.
You should discuss with the Tessy developers what their expectations are, and if they have sufficient visibility to see that they are trying to set two breakpoints at the same address.
Keil has direct support contact points, use those, not the forum.
You do realise that this is a user forum - it is not the way to contact Keil ?
See: http://www.keil.com/forum/ - look at the first bullet point under 'Note' ...
Andrew, you and I come from a place when we learned to read and ask coherent questions, and could do math with log and sine tables when we were eleven. This isn't that world..