Hi, I can't flash my LPC1768 with uVision 5.21. I keep getting this messages no matter what I do.
JLink info: ------------ DLL: V6.00e, compiled Aug 4 2016 09:37:38 Firmware: J-Link ARM-OB STM32 compiled Aug 22 2012 19:52:04 Hardware: V7.00 Feature(s) : RDI,FlashDL,FlashBP,JFlash,GDBFull
* JLink Info: TotalIRLen = 4, IRPrint = 0x01 * JLink Info: AP-IDR: 0x24770011, Type: AHB-AP * JLink Info: Found Cortex-M3 r2p0, Little endian. * JLink Info: FPUnit: 6 code (BP) slots and 2 literal slots * JLink Info: CoreSight components: * JLink Info: ROMTbl 0 @ E00FF000 * JLink Info: ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 002BB000 SCS * JLink Info: ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 002BB002 DWT * JLink Info: ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB * JLink Info: ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 002BB001 ITM * JLink Info: ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 002BB923 TPIU-Lite * JLink Info: ROMTbl 0 [5]: FFF42000, CID: B105900D, PID: 002BB924 ETM-M3 ROMTableAddr = 0xE00FF003
Target info: ------------ Device: ARMCM3 VTarget = 3.300V State of Pins: TCK: 1, TDI: 0, TDO: 1, TMS: 0, TRES: 1, TRST: 1 Hardware-Breakpoints: 6 Software-Breakpoints: 8192 Watchpoints: 4 JTAG speed: 4000 kHz
Erase Done. Programming Done. Contents mismatch at: 0000001CH (Flash=DEH Required=00H) ! Contents mismatch at: 0000001DH (Flash=B5H Required=00H) ! Contents mismatch at: 0000001EH (Flash=FFH Required=00H) ! Contents mismatch at: 0000001FH (Flash=DFH Required=00H) ! Verify Failed! Error: Flash Download failed - "Cortex-M3" Flash Load finished at 11:57:41
Any idea why?